Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Surgical, surgery and exam tables

Multi-purpose procedure table - $1,475

List: $3,675. MedCon: VG. Ritter model B type 3. 115 V, 60 Hz. Older model but in very good condition.

Features:

• various chair and table positions
• 23 in. wide seat
• hydraulic pedals raise seat/table level from 27 to 44.5 in.
• hand crank sets reverse Trendelenberg tilt
• fold away stirrups

Overall dimensions of the unit:

• 19 x 34 in. base
• height: 55

Shipping weight is about 300 pounds.

ENT Examination table - $1,475

List: $7,800. MedCon: F. DMI 219AIB examination table/chair. 115 V, 60 Hz.

Upholstery is rough, unit works well.

Features:

• 21 in. wide seat raises from 31 to 45 in.
• adjustable tilt arm supports
• footswitch has up/down controls for lift, back, tilt and foot
• 23 X 35 in. base

Shipping weight is about 300 pounds.

Cosmetic / obgyn/ uro / exam / procedure table - $1,750

List: $8,300. MedCon: inc. Ritter examination/chair, no model number. 115 V, 50/60 Hz.

Unit is missing one pad as shown.

Features:

• adjustable back and foot platforms allows positioning as upright chair, back reclined chair, flat table, Trendelenberg table
• 24 in. wide seat raises from 27 to 42.5 in.
• can be outfitted with stirrups
• footswitch built into base operates by lateral pressure
• 23.5 x 36 in. base

Shipping weight is about 300 pounds.

Deluxe ultrasound table - $2,475

List: $8,200. MedCon: VG. Biodex model 056-- 605 deluxe ultrasound table.

Features:

• four locking casters
• adjustable height 28-38 inches
• adjustable angle tilt back support
• folds from a chair into a flat table
• table patient retention straps and leg retention straps
• fold down rails

Shipping weight is about 300 pounds.

Treatment, ultrasound and transport chair - $2,675

List: $7,200. MedCon: VG. Hausted APC 200 chair.

Features:

• foot-operated pump lever raises chair height from 25 to 33 in.
• retractable side rails
• foot rest
• recline release in back
• locking casters
• built-in paper holder
• built-in chart rack
• built in oxygen bottle holder

Shipping weight is approximately 275 pounds.

Radiolucent power surgical table, C-arm compatible - $8,000

List: $62,560. MedCon: refurb. Steirline - Maquet type 130 01B orthopedic and general procedure power surgical table. Unit needs repairs to radiolucent top, which we will do before shipment.

Unit will be shipped with complete radiolucent top and new pads; in your scheduling, please allow 2 weeks after order for this work to be done.

Features:

• radiolucent top with split leg design
• power height adjust
• power lateral tilt
• power normal/reverse Trendelenberg
• power leg blades
• power lower back adjusts
• power up and back adjust
• remote hand control
• operates all power functions off of internal rechargeable batteries
• wired for 100/120 VAC, 50/60 Hz
• height range: 28-43 inches
• base dimensions: 24 x 45 inches

Shipping weight is about 450 pounds.

Radiolucent power surgical table, C-arm compatible - $8,375

List: $62,560. MedCon: refurb. Steirline - Maquet type 1130 02D orthopedic and general procedure power surgical table. Unit needs repairs to radiolucent top, which we will do before shipment.

Unit will be shipped with complete radiolucent top and new pads; in your scheduling, please allow 2 weeks after order for this work to be done.

Features:

• radiolucent top with split leg design
• power height adjust
• power lateral tilt
• power normal/reverse Trendelenberg
• power leg blades
• power lower back adjusts
• power up and back adjust
• table has a flex mode, with a flex/reflex motion
• remote hand control
• operates all power functions off of internal rechargeable batteries
• wired for 100/120 VAC, 50/60 Hz
• height range: 28-43 inches
• base dimensions: 24 x 45 inches

This table is similar to the other Maquet power surgical table that we have, with the addition of the power flex/reflex motion.

Shipping weight is about 450 pounds.

Exam chair/table - $2,750

List: $7,955. MedCon: VG. Midmark 418 exam table. 115 V, 60 Hz.

Features:

chair with foot rest, preset and adjustable tilt, and adjustable head support

footswitch raises seat height from 22.5 to 31.5 in.

chair swivels and crank locks position

Overall dimensions of the unit:

• 23 x 23 in. base
• height: 55 minimum

Shipping weight is about 250 pounds.

Examination table, power height adjust - $875

List: $3,200. MedCon: G. Joerns Lectra-Care model T102 exam table. 120 V, 60 Hz.

Features:

• footswitch raises table height from 24.5 to 35.5 in.
• pull out and tuck away stirrups
• pull out examiner's seat
• power bar with two AC outlets

Overall dimensions of the unit:

• width: 26 in.
• depth: 56
• height: 28

Shipping weight is about 300 pounds.

Orthopedic surgical fracture table - $9,750

List: $66,900. MedCon: VG. Orthopedic Equipment Company OEC model 956010 extension device.

For setting of extensive orthopedic leg fractures. C-arm compatible.

Features:

• back support, seat, leg supports and shoes are all adjustable in height
• shoe can be adjusted along rail to appropriate distance to patient
• unit rolls on casters and can be set down onto foot pads

Overall dimensions of the unit:

• width: 22 in.
• depth: 99 (min.)
• height: 42

Shipping weight is about 375 pounds.

Dental/oral surgery chair - $1,675

List: $6,525. MedCon: VG. Vacudent dental/oral surgery chair, model OS 700 pH.

Features:

• power up/down
• power tilt
• power back support adjust
• dual arm boards with retention straps, for IVs, adjustable angle
• adjustable head rest
• return to discharge position button

Dimensions:

• seat width, 19.5 inches
• seat heights, adjusts from 20-32 inches
• base, 20 x 35 inches

Shipping weight is about 275 pounds.

Exam table / procedure light combination - $875 each

List: $2,700. MedCon: VG. Midmark model 404 exam tables with attached welch allen fiber optic light source.

Features:

• hideaway stirrups
• 2 end drawers, 1 with warming light
• pull out step stool at foot end of table
• adjustable tilt back support
• storage drawers

Price includes light source as shown.

Shipping weight is about 250 pounds each. 3 units in stock.

Physical therapy table - $1,975

List: $6,875. MedCon: G. Midland table. 120 V, 60 Hz. Two tears in vinyl as indicated in photo.

Features:

• table height is adjustable from 19 to 37 inches
• remote control for raise and lower
• 9 foot power cord with hospital grade plug
• nose cut out, for when patient is face down on table

Overall dimensions of the unit:

• width: 26.5 in.
• depth: 76.5
• height: 19

Shipping weight is about 200 pounds.

Physical therapy table - $1,850

List: $6,300. MedCon: VG. Akron Therapy Products (HNE Akron) model 8432 tilt chair. 115 V, 60 Hz.

Features:

• back rest swivels (side-to-side arc) and tilts (inclination to either side)
• adjustable leg rests
• nose cut out, for when patient is face down on table
• Hannig activator raises chair by motor from 23 to 41 in. by foot pressure on base bar
• chair moves on casters and sets down on foot pads

Overall dimensions of the unit:

• width: 23 in.
• depth: 76.5
• height: 23

Shipping weight is about 300 pounds.

Power imaging/surgery table - $4,275

List: $11,300. MedCon: VG. Cone instruments (Northeast medical systems) power surgery and imaging table.

Table adjusts from a height of 26-36 inches.

Features:

• power adjustable elevation, up/down
• power lateral tilt
• power longitudinal tilt, Trendelenberg positioning
• power adjustable backrest
• flip away side rails
• locking casters
• cutout for cardiac ultrasound imaging access

Dimensions:

• length: 76 inches
• width: 25 inches
• height: 26-36 inches

Shipping weight is about 350 pounds.

Physical therapy / manipulation / traction table - $1,375

List: $4,465. MedCon: VG. One of the standard tables for chiropractors, osteopaths and physical therapists.

Henley Tru-Trac model VE-2000 physical therapy table. 115 V, 60 Hz.

Features:

• movable handswitch controls
• hydraulic raise and lower functions
• nose cut out for face down procedures
• adjustable tilt back support

Overall dimensions of the unit:

• width: 77 in.
• depth: 25
• height: min. 17, raises to 35

Shipping weight is about 170 pounds.

Spica fixation orthopedic table - $2,275

List: $6,100. MedCon: G. Orthopedic table, made by Stryker medical. For quick stabilization of orthopedic patients. With accessories as shown.

Features:

• adjustable height
• Trendelenberg
• various attachments adjusts in length and angle

Shipping weight is about 250 lbs.

Power surgical table - $12,000

List: $35,800. MedCon: VG. Amsco Steris model 3080 surgical table.

Features:

• built in batteries, rechargeable from wall outlet
• has full function running on battery power, so table is considered "portable"
• power up/down
• power left/right tilt
• power normal/reverse Trendelenberg
• floor lock
• 400 pounds patient weight capacity
• height: 27 - 44"
• seat: 27 inch wide
• Trendelenberg angle +/- 25°
• lateral tilt 18°
• radiolucent top, fully C-arm compatible
• includes cushions, not shown in photographs (add $750 for brand-new cushions)

Shipping weight is about 400 pounds.

Oral surgery / maxillofacial / ENT surgery chair - $4,375

List: $14,200. MedCon: ex. Boyd oral surgery maxillofacial and ENT surgery chair, model S-2610.

Features:

• power up/down
• power tilt back support
• power chair tilt (Trendelenberg)
• seat raises from 20 inches to 36 inches high
• Trendelenberg (head down) position
• adjustable arm board, may be used for IV drip lines
• adjustable headrest
• surgical table side rails mounted on both sides of seat base and tilt back support
• emergency stop button
• tapered back of chair permits easy access to neck and head areas of patient
• connection for a hand held remote control, not included.

foot control

• 3 programmable positions
• return to home button
• safety button
• light control
• leg support up/down
• table tilt three programmable position normal/head down
• back support up/down
• table elevation up/down

Shipping weight is about 375 pounds.

Power procedure table - $1,475

List: $3,200. MedCon: VG. Ritter model G type 75 procedure table.

Features:

• power up/down
• power tilt, up-and-down
• foot pedal
• power tilt, head down (Trendelenberg)
• adjustable headrest
• adjustable foot/leg extension
• manual horizontal rotation
• hideaway stirrups
• hideaway groin area fluid pan

Shipping weight is about 275 lbs.

Power portable pain management table, c-arm compatible - $5,975

List: $22,150. MedCon: EX. Atomic products corporation model 056-004 deluxe C-arm four way float table.

New in 1990. Unit is still supported by the manufacturer.

Features:

• radiolucent top
• normal and reverse Trendelenberg
• dual built in batteries for completely portable operation
• built-in battery charger
• float top table, moves in both X and Y horizontal directions, with dual locks
• independently controlled power elevation columns
• power tilt back support
• achieves Trendelenberg, reverse Trendelenberg or level table orientations
• locking castors
• 4 feet of x (longitudinal) and 2 feet of y (lateral) motion

Dimensions:

• 28" deep
• 76" long
• 34-46" high

Shipping weight is about 350 pounds.

Pain - C arm / endoscopy table - $3,750

List: $9,810. MedCon: EX. Olympus Keymed pain management imaging table. Features:

• radiolucent table top and mat
• hydraulically adjustable height
• normal / reverse Trendelenberg
• dual tilt back supports (so patient can lay either way on table, and still have an adjustable back support)
• dual collapsible side rails
• on castors
• tri-partite flexing radiolucent pad; 78 x 24 x 3 in.
• iv pole holder in each corner
• steer/free/brake bars at head and foot ends
• hydraulic pedal raises bed height (with pad) from 28.5 to 36 in.

Overall dimensions:

• width: 87 in.
• depth: 29
• height: 28.5

Shipping weight is about 300 pounds.

Ophthalmic / neuro surgery surgeon's chair - $4,375

List: $19,800. MedCon: VG. Leica Flexiseat. 110/120/130/220/230/240 V, 50/60 Hz.

The chair of choice for many ophthalmic and neurological surgeons. This chair includes for arm supports so that surgeon only needs to control risk and finger placement, with the supports canceling out natural fluctuations in position of the forearm, upper arm, shoulder and upper torso of a surgeon.

While a non-medical use, this chair is also used by art conservationists, sculptors and in layers to do very fine, detailed work on paintings, restorations, in legs, mosaics and other work where exact, minute finger control is needed.

Features:

• seat adjusts in height from 21.5 to 33.5 in. and can be adjusted by lever forward and back for optimal distance from the physician
• angle of the arms can be adjusted over 180 degrees
• two floor locator pins for precise distance alignment with other instrumentation
• base is 28 in. wide by 31.5 in. deep and has attached patient foot rests and chair up and down buttons on the central stem
• power on/off button at rear of base
• 26 foot power cord with hospital grade plug and optional Hubbell lock adapter

low	medium	high

Shipping weight is about 200 pounds.

Andrews spinal surgical table - $11,750

List: $37,900. MedCon: G. Andrews spinal surgical table, made by OSI. Used for patient positioning and fixation during spinal surgical procedures. type SST 3000, model 5800

Features:

• operated by hydraulic foot pump
• normal/reverse Trendelenberg
• table height up/down
• torso lift, up/down
• foot end, up/down
• lateral tilt, patient's right or left
• tibial support, up/down,
• table top height varies from 32 inches to 48 inches
• 350 pounds patient capacity
• C-arm compatible, in both AP and lateral intra operative views
• patient may be kept in face down prone, or face down kneeling position

Includes the following pads and accessories:

• iliac crest supports
• pads and small accessories, as shown

Shipping weight is about 400 pounds.

ENT / Podiatry examination chair - $975

List: $6,700. MedCon: G. Programmable examination chair, made by PDM company, model 104 ABP. Through the use of adjustable dials, programmable positions are established for height, tilt and back positions.

Features:

• power up down
• power playback
• power tilt
• adjustable arm rests
• programmable stop positions

Shipping weight is about 300 pounds.

Ophthalmic exam chair - $1,275

List: $6,275. MedCon: VG. American optical/Reichert scientific ophthalmic chair, model 14,403.

Features:

• Adjustable headrest support
• power up down
• tilt back with power lock
• footswitch
• Power switches on both sides of chair

Shipping weight is about 275 pounds.

ENT surgical procedure chair - $2,375

List: $6,200. MedCon: VG. SMR model Maxi G-2 ENT ear nose and throat surgical procedure and examination chair. in overall excellent condition, both functionally and mechanically, except has a cosmetic issue with wood grain paper on side of chair.

Features:

• power chair up/down
• power recline\upright
• Power backrests back/forward
• adjustable angle head rest
• identical control panels on both sides of chair
• Seat height raises from 19-38 inches
• 25 inch diameter metal base
• wired for 120 volts AC, 60 Hz
• chair has unusual decorative wire brush millwork on both sides of aluminum frame as shown

Shipping weight is about 275 pounds.

Surgical tables, C-arm compatible - $4,750 each

List: $36,700. MedCon: VG. Shampaigne model 1400 surgical table with radio-op top. Radiolucent top on full surgical table. This table may be used for most surgical procedures. It is both portable x-ray and C-arm compatible. New in May, 1985.

Tables features:

• Small control panel, accessible from side and end of table
• roll-around castors with positive floor locking action once table is in position in OR
• All stainless steel construction
• table top moves with 7 degrees of freedom
• Table geometry and design allows full access to patient with a C-arm
• with adjustable angle table extension that may be put in either the foot or head of table
• with standard surgical table side channels for accepting surgical table accessories such as arm boards, kidney supports, stirrups, etc. (not included with table)

Table motions:

• longitudinal slide action (lengthwise), both forward and backward deflections
• lateral tilt, both left and right
• height adjust, up and down
• Trendelenberg and reverse Trendelenberg tilting
• kidney support, up and down
• leg up / down
• back up / down

This is how this table fits a C-arm (patient and C-arm not included)

Click here for details and full pictures.

And, we have a copy of the service manual.

Surgical table extension - $875

List: $1,600. MedCon: G. Radiolucent window, C-arm compatible. Made by Rycor Medical. With flip out, adjustable height support leg. Fits most surgical tables and procedure chairs.

Exterior dimensions:

• length: 52"
• width: 17"

Shipping weight is about 40 pounds.

Spinal surgery frame - $975

List: $4,200. MedCon: VG. Codman Surgical products, spinal surgery frame. Made for Karlin technology. Model 46-3090.

Features:

• 4 locating pegs
• sturdy aluminum frame
• instructions for use printed on unit
• 2 fixed, and 1 adjustable height, pads
• dual clips that fit over surgical table side rail

Exterior dimensions:

• length: 24"
• width: 25"
• height: 30"

Shipping weight is about 50 pounds.

Oral / Maxillofacial / ENT surgery chair - $1,475

List: $7,300. MedCon: G. Midmark model 113 oral surgery chair. Also used for maxillofacial and ENT procedures.

Upholstery has some damage, but still may be used as is.

Features:

• power up /down, power back up/down, power table tilt up/down
• tilt back patient back support
• Trendelenberg (head down) position
• automatic return, single button
• adjustable headrest

Shipping weight is approximately 300 pounds.

Head/ neck/ ophthalmic surgical bed - $2,750

List: $9,852 each. MedCon: EX. Stryker model 966 head/neck/ophthalmic surgery bed. Also called a surgical gurney.

Features:

• tapered head support
• hydraulic adjustable height
• normal/reverse Trendelenberg
• removable IV pole
• built-in oxygen bottle carrier
• steering and locking castors
• collapsible side rails
• adjustable angle back support

Shipping weight is about 350 pounds each.

Spinal surgery surgibed - $2,975 each

List: $9,300. MedCon: EX. Stryker model 965 spinal surgery bed. for treatment of spinal surgery patients. Sometimes referred to as a rotabed, used for treatment of patients with burns and orthopedic trauma.

Features:

• height adjusts from 33 inches to 47 inches
• bed d pad 82" x 19"
• 24 inches diameter turning wheel
• security locking pin for wheel, prevents accidental patient rotation
• anterior and posterior frames
• bedpan portal and bedpan holder
• pulley guides for traction device
• 2 side arm boards, each 11 x 10 inches
• units new in 1997
• mattress clamps patient from both top and bottom so they may be turned “elbow over elbow”
• bed rotation permits patient to be easily turned with out having to physically rearrange them on the bed.
• 4 castors with steer/brake/freewheel control lever
• normal/reverse Trendelenberg
• has pulleys on moveable supports on end, so that patient limbs or extremities maybe kept under traction
• under bed storage tray

Overall dimensions:

• length: 99 inches
• width: 29
• height: 48

Shipping weight is about 350 pounds each. 2 units in stock.

Chick- Langren orthopedic surgical operating table - $9,000

List: $109,000. MedCon: EX. Chick orthopedic surgical table, model 10500 CLT, with accessories as shown. May be configured in various ways to perform many procedures. Table has a radiolucent top, may be used may be set up for both portable x-ray and C-arm use.

This table may be used for the following procedures:

• hip pinning, unilateral skin traction
• hip pinning, bilateral skin traction
• imtramedullary nailing, femur, lateral position, skin traction
• imtramedullary nailing, femur, lateral position, skeletal traction
• imtramedullary nailing, Kuntsher position
• imtramedullary nailing, supine position
• imtramedullary nailing, Tibia
• imtramedullary nailing, Humerus
• special procedures
• upper torso
• spinal surgery
• spinal casting
• cervical spine
• full body casting
• lateral canvas yoke technique
• upper extremity casting
• hip spica, pediatric
• hip spica, adult

Some of the basic features of this table are:

• IV hangar
• Pump pedal
• head end floor lock
• foot end floor lock
• lateral tilt control
• A-P cassette tunnel positioning board assembly
• GM boards
• Sacral assembly
• well leg support
• dual bell foot piece traction assemblies
• perineal post
• drapery rods
• top rail lock

overview of true to the upper leg support
overview of foot holder, ankle holder and adjustments
head and of table, showing lateral tilt crank, normal/reverse Trendelenberg hydraulic adjustments, foot pedal, and Castor steer/locking lever
Thigh board
Additional support board
Trunk board, radio lucent, hold 14 x 17 inches film cassette
two additional support fixation devices
cassette holder
a distant additional positioning device, and leg holder
additional IV holder
additional support holder
table extension, fixed on to head of table, 6 feet long, radiolucent
various fixation devices
serial number plate

Shipping weight is about 900 pounds.

Power ENT /oral surgery exam chairs - $675 each

List: $3,310 each. MedCon: VG. Reliance model 648 dental oral surgery and ENT exam chair.

Features:

• power operation, up/down
• chair raises from 20.5 inches to 27 inches in height (measured to base top of seat rest)
• adjustable back rest
• adjustable head rest

Shipping weight is approximately 175 pounds each. 2 units in stock.

Oral surgery / maxillofacial / ENT surgery chair - $2,750

List: $12,200. MedCon: ex. Boyd oral surgery maxillofacial and ENT surgery chair, model S-615.

Features:

• power up/down
• power tilt back support
• power chair tilt (Trendelenberg)
• seat raises from 20 inches to 36 inches high
• Trendelenberg (head down) position
• adjustable arm boards, may be used for IV drip lines
• adjustable headrest
• surgical table side rails mounted on both sides of seat eighths and tilt back support
• 2 AC power outlets located under arm rest for powering other instruments

Shipping weight is about 400 pounds.

Power surgical table, C-arm compatible - $7,500

List: $27,350. MedCon: G. power surgical table, with full radiolucent top. Chick CST-RC model SE 2001, made by Kirschner medical Corporation.

Features:

• uses stored energy concept: a small air compressor stores energy to operate the table, even when not connected to wall power
• power up/down
• power table tilt, left and right
• power normal/reverse Trendelenberg
• power table flex
• all power controls require pushing of safety button, and relevant control, to prevent accidental table motion
• table may also be set up for orthopedic use
• table also accepts expanded headrest accessories (not included), and lower leg support may be changed out
• unit also has a manual foot pump that can operate any of the motions
• table also has a manual foot pump to operate all motions manually by pumping the foot pedal
• full side rail support, accepts standard Amsco and other surgical table accessories

Table geometry allows C-arm access to entire upper and lower leg, full abdomen, and lower chest of the patient. Also, arm board is radiolucent, so that may be imaged as well.

Shipping weight is about 550 pounds.

Power OBGYN / minor surgery procedure table - $1,975

List: $3,200. MedCon: G. Ritter model F procedure table.

Features:

• power up/down elevation
• power tilt, head down (Trendelenberg)
• adjustable headrest and adjustable extension
• foot pedal
• manual horizontal rotation
• hideaway stirrups
• hideaway groin area fluid pan

When low to the ground, table is low enough to easily accommodate a patient getting in a wheelchair. (about 20 inches).

Shipping weight is about 300 pounds.

Podiatry chair - $1,275

List: $4,900. MedCon: G. Ritter podiatry chair.

Features:

• power up/down
• power functions controlled through hand operated pendant, as shown
• foot rest has tear in upholstery
• power table tilt back
• adjustable power knee support, as shown in photos

Shipping weight is about 300 pounds.

Imaging/ ultrasound/ OBGYN chair - $1,475 each

List: $4,865. MedCon: EX. Atomic Products model 056-605 imaging and ultrasound chair. Functions as either a chair, or lays completely flat to be a table.

Features:

• table is hydraulically adjustable up/down
• drop away leg section, adjustable angle
• accepts folding side rails, not included
• contoured tabletop design, narrow stem 19 inches wide four probe accepts
• adjustable Fowler back support, manually adjusted in five increments
• place for IV pole
• accepts optional stirrups
• four locking castors
• base of table is shaped to maneuver around other equipment

4 matching units in stock.

Shipping weight is approximately 300 pounds each.

OB/GYN delivery/surgical table - $1,750

List: $11,220. MedCon: G. Shampaigne model 2605 labor and delivery table.

Used for labor and OBGYN surgical procedures, specifically C-sections cesarean sections.

Features:

• pull out support in leg area hidden base in for fluids
• patient hand pull bars
• clamps for stirrups
• adjustable tilt back support
• normal/reverse Trendelenberg
• break/lock lever
• hydraulic up/down

Shipping weight is about 300 pounds.

Power tilt table - $1,475

List: $6,200. MedCon: EX. Vertical / horizontal power tilt table. Tables go from full vertical to full horizontal. In this way, patients who can not kneel can hold themselves into table. Made by Tri wg.

Features:

• patient grip bar
• down table support leg
• retention straps
• power hand control

Power hand control is situated so that patient may operate table themselves.

Shipping weight is about 200 pounds.

Urology power procedure table - $975

List: $9,700. MedCon: G. Synetics urology table, made by Synetics medical products. In excellent condition except one leg support pad is missing.

Features:

• power adjustable height
• power adjustable tilt back
• power adjustable tilt seat
• manually adjustable stirrups
• manually adjustable leg supports
• hand-held power control switch
• on castors for ease of table positioning

Shipping weight is about 300 pounds, although actual weight is somewhat less.

OBGYN exam tables - $425 each

List: $930 each. MedCon: VG. OBGYN tables, as shown. Upholstery is in good condition.

Features:

• adjustable back support
• tilt up leg support
• to pull out drawers at foot end
• pullout patient step at foot end
• pullout groin fluid pan with padded cover
• pullout, hideaway stirrups

1.

Units are shown palletized, ready for shipping. Shipping weight is about 300 pounds each. 2 units in stock, as shown.

Large physical therapy table - $1,475

List: $5,470. MedCon: ex. Tri WG high low physical therapy table.

Features:

• 5 ft. wide, 7 ft. long
• variable height, 24 in. when down, 36 in. up
• padded top, with blue upholstery
• removable top for transportation and storage

Shipping weight is about 400 lbs.

Visual stimulation chair and stool - $975 the pair

List: $2,300. MedCon: VG. Visual stimulation chair, and physicians stool. patient chair features a back support at a head rest. This chair provides a resting place for a patient undergoing visual stimuli testing, such as used in ENT or neurology offices.

Upholstery on stool and chair match each other.

Shipping weight is approximately 275 lbs.

Traction table - $575

List: $1800. MedCon: F. In good functional condition, however upholstery is in poor condition. Table splits in middle, allowing one half of the table to move longitudinally in relation to the other half of the table. For chiropractic and back adjustment procedures.

shipping weight is about 150 lbs.

Traction table - $575

List: $1800. MedCon: F. In good functional condition, however upholstery is in poor condition. Table splits in middle, allowing one half of the table to move longitudinally in relation to the other half of the table. For chiropractic and back adjustment procedures.

shipping weight is about 150 lbs.

Traction table - $975

List: $2350. MedCon: VG. Tru-Trac traction and therapy table, made by traction specialties. Used for traction procedures, chiropractic and osteopathic manipulations. one half of the table slides longitudinally in relation to the other half of the table. With face cut out.

Shipping weight is about 200 lbs.

Stainless surgical instrument table - $600

List: $1,500. MedCon: VG. Stainless steel table, with bend in middle.

About 5 feet wide overall. 30 degree angel deflection in middle.

Shipping weight is about 100 pounds.

Pathology dissection table - $575

List: $1,800. MedCon: G. Specimen dissection table. All stainless steel construction. Has a slit depression in center of table, so that fluid spilled onto table drain through central drain.

Exterior dimensions:

• length: 48"
• width: 26"
• height: 30"

Shipping weight is about 125 pounds.

Tilt back procedure chair - $2,475

List: $7,300. MedCon: G. Hill rom procedural recliner chair.

Features:

• blue upholstery
• arm rests on both sides of chair go down
• tilt back design, with swing up leg support
• position bar in back of chair
• netting on chair back for small item storage
• hydraulic up / down motion, operated by foot pedal

Exterior dimensions:

• length: 78"
• width: 31"
• height: 25 - 54"

Shipping weight is about 275 pounds.

Surgical table leg holder - $975 each

List: $2,475. MedCon: VG. Surgical table leg holder. Fits into side rail clamp on a surgical table, and holds a patient's leg securely and firmly. Adjustable width.

2 units in stock.

Shipping weight is about 40 pounds each.

Manipulation and treatment tables - $975

List: $2,250. MedCon: G. Manipulation tables, as used by osteopaths and chiropractors. Each table is electric up and down adjustable. one uses a foot control, the other switch on the side of the table

Exterior dimensions:

• length: 79"
• width: 28"
• height: 22" when down

Shipping weight is about 250 pounds.

Amsco electric surgery table - $6,000

List: $23,700. MedCon: G. Amsco 2080 RC electric surgery table, with add-on radiolucent top.

A full electric surgical table.

Features:

• has controls on both remote handpiece and on table
• powered normal/ reverse Trendelenberg
• powered up / down
• powered side tilt, left and right
• powered back tilt
• powered leg rest
• powered table top flex and reflex
• manual kidney support
• wheels and locking base
• with foot pedals at head end of table
• wired for 110 volts AC, 50 / 60 Hz
• radiolucent top, so shots may be taken using a cassette and portable x-ray
• all stainless steel construction
• typical AMSCO over-engineering

Click here for full details.

An excellent all around surgical table. Shipping weight is about 400 pounds.

Portable surgical table - $475 each

List: $850. MedCon: VG. All stainless steel construction, for exams or surgical procedures. 18" wide. Adjustable headrest, goes from +90 to -45 degree angle. Includes thin brown pad. Each leg has a thumb clamp for height adjustment. Table is of light enough weight so that it is portable (about 125 pounds total).

By Vanco. 3 units in stock.

Orthopedic surgical table - $4,750

List: $27,370. MedCon: VG. Chick model 2001 CST orthopedic surgical table. The geometry of the table allows enough room for access to a C-arm to adequately image the upper leg, partial lower leg, full abdomen and complete lower chest of the patient. In this way a fracture or other orthopedic work may be performed, and image taken, and adjustments made accordingly while the patient is on the table.

Click here for complete pictures.

Patient transfer rollers - $475

List: $900. MedCon: Ex. Patient transfer roller, 6 feet long. used to transfer a patient from a bed or gurney onto and off off a surgical table.

Made by Alimed. Shipping weight is about 30 pounds.

Surgical table radiolucent top - $900

List: $2,500. MedCon: G. X-ray transparent top for Amsco 1080 or 2080 surgical tables.

Does not include surgical table. Enables use of portable X-ray with normal surgical table.

ENT procedure chair - $1,750

List: $5,800. MedCon: EX. Procedure chair, by Belmont, for dermatology or ENT use, shown here in an office setting. Does not include wall lights. Features:

• Power up/ down
• power tilt back
• adjustable height head rest
• manual horizontal rotation.

Table and gurney accessories

• MedCon: EX. Collapsible 2 place IV pole, also tilts down, on side channel clamp. Midmark s/n TO16287 and TO16612. 2 in stock. $275 each
• MedCon: N. Clip on seat cushion, brown, probably Midmark, $85
• MedCon: EX. Arm rests. Clamp to side of channel, clamp mechanism is integral to arm support. 5 pair in stock. Red brown, brown and 2 tone, pink over white plastic. Midmark, s/n TO11147 and others. $325 per pair.
• MedCon: N. Hausted, threaded pole for gurney, about 18" long, stainless, 12 in stock - $25 each
• MedCon: N. IV pole bracket, built into end bumper for gurney. Hausted, 7 in stock - $45 each
• MedCon: N. Amsco 1080 channel clamps, 2 in stock, $75 each
• MedCon: VG. Surgical table stirrups, Amsco and others, for orthopedic, surgical and other tables. Stirrups are adjustable in length, with back of knee support. 9 in stock, $375 per pair
• MedCon: EX. Leg supports, Hillrom adjustable leg pad with holder, $175 / pair
• MedCon: EX. Midmark knee support, small, with table clamps. $325 / pair
• MedCon: EX. Lock in stirrups OBGYN style, for gurney. Looks similar to exam table OBGYN type stirrups, with adjustable pin clamps. 3 pair in stock, $225 / pair.
• MedCon: F. Leg stirrups for Hydra adjust and other urology tables, no clamps, adjustable and an rotation. Probably Liebel Flarsheim. $95 / leg.
• MedCon: EX. 4 sets leg stirrups for Hillrom birthing bed, with adjustable support. $375 per pair

© Copyright 1993 - 2009 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

Surgicaltable.com

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482